Productnaam | Kant Opgezette Hoge druk Magnetische Vloeibare Vlakke Maat voor Boilervloeistof |
---|---|
Nominale druk | PN2.5~PN40, PN40~PN320 (x 0.1MPa) |
Procesverbinding | DN20~DN250/RF/14 |
max controlegebied | L-120mm |
Dichtheid | > 0,45 g / cm3 |
Productnaam | De partij zet Anticorrosieve Magnetische Floater-Olie Vlakke Maat voor Tank op |
---|---|
Druk | Van vacuüm tot 42Mpa |
Verbinding | flens DN50 ~ DN150 RF |
max controlegebied | L-120mm |
Levensduur | 5-10 jaar |
Productnaam | De Magnetische Olie op hoge temperatuur en Maat van de Druk |
---|---|
Nominale druk | PN2.5~PN40, PN40~PN320 (x 0.1MPa) |
Procesverbinding | DN20~DN250/RF/14 |
max controlegebied | L120mm |
Dichtheid | > 0,45 g / cm3 |
Min controle | 50mm |
---|---|
Druk | Van vacuüm aan 42Mpa |
Maximum meting | L=6m |
Maximum controlegebied | L-120mm |
Dichtheid | >0.45g/cm3 |
Productnaam | Water of de Zendermaatregeleninstrument van het Olieniveau |
---|---|
Garantie | 18 maanden |
Levering | Druk uit, verscheep, Lucht |
De afstand van het installatiecentrum | 150~6000mm |
Druk | Van vacuüm tot 42Mpa |
Temperatuur | -190~425℃ |
---|---|
Garantie | 12 maanden |
Druk | pn20~pn250 |
Productnaam | Boiler Magnetische Vlakke Maat op hoge temperatuur met Niveauschakelaar |
Installatievorm | de partij zette op, opgezette bovenkant, kabeltype, opgezette side+top… |
Temperatuur | -190~425℃ |
---|---|
Productnaam | Van de de Brandstoftank van VACORDA 4-20mA het Glas van het de Vlakke Maatgezicht met Goede Stabilit |
Druk | Van vacuüm tot 42Mpa |
Kleur | witte/rode klepindicator |
Installatievorm | de partij zette op, opgezette bovenkant, kabeltype, opgezette side+top… |
Druk | PN6-PN63 (x0.1MPa) |
---|---|
Verbinding | FlangeDN20/RF/14 |
Centrum aan centrum afstand | 150mm6000mm |
Dichtheid | > 0,45 g / cm3 |
Productnaam | De explosiebestendige Magnetische Vlakke Maatafstandsbediening met Flens DN20/RF/14 verbindt |
Min controle | 50mm |
---|---|
Druk | Van vacuüm tot 42Mpa |
Maximum meting | L=6m |
max controlegebied | L-120mm |
Dichtheid | > 0,45 g / cm3 |
Temperatuur | -190℃-425 ℃ |
---|---|
Druk | PN2.5~PN160 |
Centrum aan centrum afstand | 150mm6000mm of passen aan |
Na de dienst | 12 maanden |
Meterial | 304,316L, 1Cr18Ni9Ti, 0Cr18Ni9,00Cr17Ni14Mo2, Titanium |